IoT gateway and data logger, designed and made by SpaceEcho
ECHO-Gateway v4
SpaceEcho's flagship IoT gateway and data logger: 4G and Ethernet with automatic failover, no data lost in an...
Model: RD-PH
pH sensor for water, 0–14 pH, ±0.02 pH, for environmental monitoring, aquaculture and laboratory use.
The RD-PH is a pH sensor for water. It gives stable, fast pH readings for environmental monitoring, aquaculture and laboratory use. Its robust design is easy to install and maintain, so it suits continuous water quality assessment. It connects to a SpaceEcho station and reports to EchoCloud.

| Measuring range | 0–14 pH |
|---|---|
| Resolution | 0.01 pH; 1 mV |
| Accuracy | ±0.02 pH; ±1 mV |
| Operating pressure | 6 bar |
| Housing material | ABS |
| Output interface | Analog; digital Modbus RS-485 |
| Supply voltage | 12–36 V DC |
| Cable length | Configurable |
These three probes measure different parameters, so they are used together rather than instead of each other.
| Sensor | Measures |
|---|---|
| RD-PH | pH (0–14 pH) |
| Dissolved Oxygen Sensor | Dissolved oxygen (0–20 mg/L) and water temperature |
| All-in-One Water Sensor | Electrical conductivity, total dissolved solids, salinity and temperature |
IoT gateway and data logger, designed and made by SpaceEcho
SpaceEcho's flagship IoT gateway and data logger: 4G and Ethernet with automatic failover, no data lost in an...
IP67 sensor expansion hub for the ECHO-Gateway, designed and made by SpaceEcho
An IP67 RS-485 hub that gives the ECHO-Gateway 8 sensor ports, and up to 32 ports with 4 daisy-chained hubs. I...
Outdoor signal converter to RS-485, from SpaceEcho
An IP67 outdoor converter that turns 0–10 V, 4–20 mA or SDI-12 sensor signals into RS-485, for the ECHO-Gatewa...
Request a Quote
Working with
Request received
Thanks — our team will contact you shortly.