Automated Groundwater Monitoring System
Water Level & Quality
- Groundwater level and water quality sensors
- Real-time data transmission to EchoCloud
- Solar-powered, off-grid operation with battery backup
- Single, profile and grid station configurations
- Level Monitoring
- Quality Monitoring
- Real-Time Data
- Remote Access
Continuous, real-time insight into aquifer conditions and trends
Smart monitoring of groundwater level and quality
SpaceEcho provides automated monitoring stations with sensors and data loggers that continuously measure groundwater level and water quality. Data reaches EchoCloud in real time, for continuous monitoring of aquifer conditions and trends, with live well-level tracking on the EchoCloud dashboard.
Inside every station
- Solar power system
- Powers the station for continuous, reliable operation in remote locations.
- Data logger and communication
- Transmits data via 4G and Ethernet to EchoCloud.
- Electronic junction box
- IP65-rated, protecting the electronics from dust, rain and harsh environments.
- Built-in battery
- Backup power for uninterrupted operation during low sunlight or power fluctuations.
- Water quality probes
- Installed in the well to measure water quality parameters in real time.
On EchoCloud, every station adds real-time monitoring, cloud connectivity, smart alerts, and historical data and reports.

Data acquisition
ECHO-Gateway v4 — cloud-enabled IoT data logger
The core of every station. It acquires sensor data, stores it locally, and pushes it to EchoCloud over whichever communication path is available on site.

| Size / weight | 154 × 158 × 39 mm / 300 g |
|---|---|
| Operating voltage | 12–36 V DC |
| Power draw | About 2 W average, depending on enabled features |
| Storage | 3 microSD cards for data, station health and backup |
| Connectivity | 4G, Ethernet, Wi-Fi, with automatic failover between 4G and Ethernet |
| Ports | RS-485, RS-232, Ethernet RJ45 |
| Protection | Short-circuit, reverse-polarity, over-voltage, ESD, EFT |
| State of health | Real-time review of each station's system parameters, for early issue detection and optimized maintenance |
EchoHub-485 — sensor expansion hub
An IP67 RS-485 hub that gives the gateway 8 sensor ports, and up to 32 ports with 4 daisy-chained hubs (120 readings). It supports long wires to the sensors and can stand far from the gateway.
Piezometric level probes and water-quality sensors connect directly into any EchoHub-485 channel for continuous level and quality monitoring.

Field configurations
Wells and stations are combined in three field-proven configurations, for different observation and assessment requirements.
Single station — localized monitoring
Monitors conditions at a specific observation well, providing site-specific data and identifying local variations over time.

Profile station — directional monitoring
Uses a series of aligned observation wells and stations to track groundwater changes along a defined direction, supporting analysis of groundwater movement and seawater intrusion.

Grid station — spatial mapping
Deploys observation wells and monitoring stations across a defined area to capture spatial variations and generate detailed, high-resolution groundwater contour maps.

In the field
At the Hawara archaeological site in Fayum, Egypt, nine SpaceEcho stations have monitored groundwater since 2020, including infiltration and flooding inside the pyramid itself.

Request a Quote
Tell us about your site
- A site survey before anything is specified
- Installation, commissioning and operator training
- EchoCloud access from the day the station reports
Working with
Request received
Thanks — our team will contact you shortly.