Skip to content
All products

Model: ECHO-TG

Tide Gauge Station

A configurable tide gauge station built from SpaceEcho devices and sensors. It measures sea level by pressure, radar and ultrasonic sensing, and reports to EchoCloud.

The ECHO-TG is a tide gauge station for ports, harbours and coastal research sites. This complete tide monitoring system is built as one bundle of SpaceEcho devices and sensors. Each tide gauge instrument measures sea level by pressure, radar or ultrasonic sensing, separately or combined. The ECHO-Gateway v4 logs the readings on site and sends them to EchoCloud.

Features

Three ways to measure tide
Pressure, radar and ultrasonic sensors work separately, or together for high-accuracy data.
Configurable station
Measure level only, or add weather sensors.
Double-cone orifice with double plate
Part of the station's stilling well. It reduces the effect of currents, waves and vessel wakes on the reading.
Unified datum
All your stations share one reference level, set with GPS and levelling devices.
Dual communication
4G and Ethernet together. If one goes down, the station restores communication over the other.
No data lost in an outage
If all communication is down, the station keeps logging and resends the data when the connection returns.
Live data and alerts
View readings, history and station health in EchoCloud, with alerts by email, Telegram and WhatsApp.
Remote management
Change sampling rates and send commands from EchoCloud.
Installation and support
SpaceEcho installs and maintains the station, with a 2-year hardware warranty and 24/7 technical support.

Tide gauge sensors: pressure, radar and ultrasonic

Each tide sensor can run alone. Running them together lets each reading be checked against the others. A radar tide gauge measures from above the water without touching it, a pressure sensor works submerged, and an ultrasonic sensor also tracks surface waves.

MethodSensorMeasuring rangeAccuracy
PressurePiezometric Level Sensor0–5, 0–10 or 0–15 m±0.2 % F.S.
RadarRadar Level Sensor0.1–40 m±2 mm
UltrasonicAcoustic Level Sensor28–700 cm±1 cm

Double-cone orifice with double plate

Sea level at a harbour wall is never still. Currents, waves and vessel wakes can all reach a tide gauge as measurement error. That is why the double-cone orifice with double plate is part of the ECHO-TG station.

Inside the stilling well

The station measures inside a stilling well, and the orifice sits at the bottom of the well. Water enters through the gap between the two plates, then passes through the double cone into the well. This reduces the disturbances, so the water inside stays calm for stable readings.

Tide gauge stilling well with a double-cone orifice and two gold plates at its base, under water
Double-cone orifice with double plate at the bottom of the stilling well (illustration).

How it is built

A white double-cone body is bolted to the upper plate. Threaded rods hold the lower plate below it, leaving an open gap for the water to enter.

Exploded view of the double-cone orifice: white body, screws, upper plate, threaded rods and lower plate
Parts of the double-cone orifice with double plate (illustration).

Advanced tide gauge intake design

Our improved intake design minimizes the effects of strong water currents on tide level measurements, delivering more stable and reliable readings.

Up to 88% reduction in current-induced drawdown error

Engineered to significantly reduce measurement deviations caused by water flow, ensuring enhanced accuracy and reliability under high-current conditions.

Performance figures are based on referenced experimental study results.

Tide monitoring system configurations

Level only
Sea level measurement with one sensor type or more.
Level and weather
Adds a meteorological unit and other weather sensors at the same station. See also the Weather Monitoring Station.
More sensors
The EchoHub-485 gives the station more sensor ports, and it can stand far from the gateway.
Non RS-485 sensors
The EchoHub Combine Unit converts 0–10 V, 4–20 mA or SDI-12 signals to RS-485, by model.

Mounting structures

The station is mounted to suit the site. SpaceEcho offers two structures.

L-shape structure for concrete marine piers

A steel mast on an L-shaped base, bolted to the concrete at the pier edge. The enclosure, weather sensor and stilling wells all mount on or beside the mast.

L-shape tide gauge structure on a concrete marine pier, with a black mast, grey enclosure, two white pipes and a weather sensor
L-shape structure on a concrete marine pier (illustration).

Flexible structure for unpaved ground

A flexible structure for spots with unpaved ground. Its arm holds the sensor out over the water.

Flexible tide gauge structure with an arm holding a radar sensor out over the water, and a grey enclosure
Flexible structure with a radar sensor over the water (illustration).

Unified datum

Readings from different stations can only be compared if they share one reference level. SpaceEcho levels your stations with GPS and levelling devices, so all of them report to a unified datum.

SpaceEcho tide gauge station on a harbour wall, with its enclosure, solar panel and sensor mast
SpaceEcho tide gauge station on a harbour wall.

Specifications

Measurement methodsPressure, radar, ultrasonic
IntakeStilling well with double-cone orifice and double plate
MountingL-shape structure for concrete marine piers; flexible structure for unpaved ground
Data loggerECHO-Gateway v4
Sensor ports1 on the gateway; 8 with one EchoHub-485; 32 with 4 hubs
Connectivity4G, Ethernet, Wi-Fi
FailoverAutomatic between 4G and Ethernet; data stored and resent after an outage
Storage3 microSD cards
Power sourcesAC/DC adapter, battery, solar
Power consumption15 W typical, 24 W peak
SoftwareEchoCloud, with 24/7 access and 99.9% uptime
AlertsEchoCloud, email, Telegram, WhatsApp
Warranty2-year hardware warranty
Support24/7 technical support

Applications

Ports and harbours
Continuous tidal monitoring where vessels berth and move.
Sea level networks
Long-term records from fixed coastal stations on one datum.
Hydrographic surveying
Tide data from a reference station.
Coastal research
Tide and wave data alongside the weather.

Other monitoring stations

All products
  • IoT gateway and data logger, designed and made by SpaceEcho

    ECHO-Gateway v4

    SpaceEcho's flagship IoT gateway and data logger: 4G and Ethernet with automatic failover, no data lost in an...

  • IP67 sensor expansion hub for the ECHO-Gateway, designed and made by SpaceEcho

    EchoHub-485

    An IP67 RS-485 hub that gives the ECHO-Gateway 8 sensor ports, and up to 32 ports with 4 daisy-chained hubs. I...

  • Outdoor signal converter to RS-485, from SpaceEcho

    EchoHub Combine Unit

    An IP67 outdoor converter that turns 0–10 V, 4–20 mA or SDI-12 sensor signals into RS-485, for the ECHO-Gatewa...

Frequently asked questions

Which tide gauge sensor should I choose?

SpaceEcho offers pressure, radar and ultrasonic tide gauge sensors. They can work separately, or combined for high-accuracy data. The right choice depends on your site.

What is a radar tide gauge?

It measures the water level from above the water, without touching it. The RW04 radar sensor has a range of 0.1–40 m and an accuracy of ±2 mm.

What does the double-cone orifice do?

It is part of the station's stilling well. It reduces the effect of currents, waves and vessel wakes, so the water inside the well stays calm for stable readings.

Can I choose what the station measures?

Yes. The station is configurable. It can measure level only, or add weather sensors.

Can several stations share one reference level?

Yes. SpaceEcho provides a unified datum for all your stations, using GPS and levelling devices.

What happens if the connection goes down?

With 4G and Ethernet, the station restores communication over the other link. If all communication is down, it keeps the data and resends it when the connection returns.

Does SpaceEcho install the station?

Yes. SpaceEcho provides installation and maintenance services, with a 2-year hardware warranty and 24/7 technical support.

How is the station mounted?

There are two options: an L-shape structure for concrete marine piers, and a flexible structure for unpaved ground.

Request a Quote

Tell us about your site

Send us what you are monitoring and where. An engineer will read it and reply — not a sales form letter.
  • A site survey before anything is specified
  • Installation, commissioning and operator training
  • EchoCloud access from the day the station reports

Working with

Quote request for Tide Gauge Station

Include your country code, for example +20.

Solutions of interest

Optional. Pick any that apply — it helps us route your request to the right engineer.

Groundwater Management

Surface Water Management

Smart Farm Management

Optional. Site location, number of points, what you need to measure.

Preferred contact method (required)

We use your details only to answer this request.